alright..got the stuff in finally, just some minor adjustments for fitment, and we're on the money....
1) had to push the A/C line (coming out of the compressor) forwards toward the radiator a tad to get it away from the #2 head pipe.
2) will have to cut the corner out of the heater hose hardline and route it over the top of the thermostat housing
3) oil dipstick had to be moved outward a little for the flange.
4) need to remove the transmission filler cap and replace with a smaller brass plug because the crossover actually touches it. Small thing to deal with considering the benefit.
5) relocate the transmission shift cable bracket.
6) extend the O2 sensor wiring.
