3.4 swap - GM Performance Tuning

96gapadam · #1 (**permalink**) 02-12-2004, 03:32 PM

i am wanting to do a 3.4 swap with my 3.1. i was wondering if anyone can help me out on what i need to do to do this and everything. do i need to keep anything or get new. also is my tranny fit or do i need to get one of those to.

thanks
shawn

jeremy96gase · #2 (**permalink**) 02-12-2004, 04:25 PM

http://www.3400swap.com

therealdeal069 · #3 (**permalink**) 02-12-2004, 05:11 PM

hey do you already have a engine and tranny

jeremy96gase · #4 (**permalink**) 02-12-2004, 05:34 PM

Quote:

Originally posted by therealdeal069
hey do you already have a engine and tranny

It kinda sounds like he doesn't.

Therealdeal you have a PM

therealdeal069 · #5 (**permalink**) 02-12-2004, 05:44 PM

well if you need any parts i am pulling my 3.4 litre in the following weeks hopefully pm me

JohnTheMan · #6 (**permalink**) 02-12-2004, 06:24 PM

I feel like swapping out my 3.1 Getting my gaskets redone at GM with all the labor its almost cheaper to put in a 3.4

Peyman · #7 (**permalink**) 02-12-2004, 10:21 PM

Quote:

Originally posted by therealdeal069
well if you need any parts i am pulling my 3.4 litre in the following weeks hopefully pm me

you wanna meet up and throw your 3.4 in my car?... :beer:

Evil Steph · #8 (**permalink**) 02-13-2004, 12:03 AM

you use your stock trans, coolant lines, belt drive setup, and wirng.

When getting your 3400 request the starter if its 2000 up.

eric99gt · #9 (**permalink**) 02-13-2004, 12:05 AM

therealdeal. U've been talkin about this swap alot. How u gonna go about doing it??? have any info on it????

96gapadam · #10 (**permalink**) 02-13-2004, 01:16 PM

i dont have the engine yet but i have one i am looking at that has 12000 miles that comes with a tranny for 600 i was wondering how much work in on this job or if it is worth the work and hassel
thanks
shawn

BobGAGT · #11 (**permalink**) 02-13-2004, 02:01 PM

You use your stock tranny... so buy the $600 one with the transmission and sell the transmission. What year is the engine from?

korbendallas68 · #12 (**permalink**) 02-13-2004, 06:35 PM

Did you even visit the site??
Ugh.

Go there and read the FAQ please... And may be glace through the guide.....

BobGAGT · #13 (**permalink**) 02-14-2004, 12:56 AM

LOL... "ugh"

gran_dam98 · #14 (**permalink**) 02-14-2004, 11:17 PM

hell, ugh.. I've printed out the damn 27 page how to guide, i've been reading it over like crazy. I'm getting excited to drop a 3.4 in my car.. thanks for that site man.. great info!

korbendallas68 · #15 (**permalink**) 02-15-2004, 02:33 AM

No prob.

Remember, any questions you ask will only help the site... (that is if the question hasn't already been answered on it. lol)