|
|||
|
My new setup UPDATED 6/4/2005
the picture shows a rough idea of where everything will be. the 2 big holes on the bottom part i will put 2 yellow top batteries, the smaller holes in front of the batteries i will put batcap 800's. for amps i will use bostwick da1200hc, 2 of them. also i will bostwick crossovers for each amp. up at the back window i will put my mids and high amp a bostwick ma4100x. next weekend i will start putting everything in. there will be alot of wiring so i am taking my time unlike last year. my plan is to install everything, get it working perfectly then rip it out again and cover it to match my katzkin seats. for subs i am using bostwick dcl dual 4 ohm 15 inch, 2 of them. for components i am using bostwick hd pro 6.5. as well i have 3 inch bostwick speakers for the front. i am using stinger for all of my wiring and if it has to do with audio its bostwick. just wanted to let people know and hope to see some of yall at some shows this year, i plan attending some with deptacon. Last edited by gobraves00; 06-06-2005 at 12:42 AM. |
|
|||
|
its a batcap 800. how the diagram and the guy im working with at batcap that is how i am to wire it. i know everything getting power, i will next time whether it is going to power amp. should triple checked everything. this time i have taken the slow approach and not rushing anything, when ever i have a question i find the amswer versus just trying it and hoping it works.
|
|
||||
|
do not rush take your time trust me. i have to do like 15 cars a day, if i rush em i get 9 done if i take my time i get all done
__________________
05 GTO M6 Black/Black/Red. Banshee Guage pod with AeroForce Tech Interceptor Scan Gauge, K&N typhoon intake, ported intake manifold, ported TB, Pacesetter LTs V2 and their mid pipes with pypes high flows cats , Corsa X pipe to Magnaflow 6" rounds with 4' tips, BMR drag bags, Noltec bushings, GMM Rip shifter race V2, and a custom dyno tuned for 363 RWH and 373 Lbs/TQ. SOLD :( back to the ole nissan frontier... |
|
|||
|
well yesterday was rather productive but at same time disappointing. i got all 3 amps hooked up along with the crossovers for each amp. got the fuses in place. ran all new remote wires, ran a new power and ground wire for the HU. got the RCA's how i wanted them. was ver pleased with everything i had accomplshed....until i put HU in as the last step and my HU dont work. so i dont know if anything works no way to test it. im 99% positive that everything will fire up but it was just a let down. also i have had a radio in my car since october last year. going to bestbuy after work today to get the HU fixed or replaced, hopefully they replace that way i dont have to wait on them to send off. well i did take some pics so here are those. i am waiting on Bostwick to send me the crossovers for the components thats why i have not put in y
|
![]() |
| Bookmarks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|