Injector help... Need advice please!!!

[gran_dam98]

Alright, as many of you know, I have put the 3400 into my 98. And as 3400.com says, keep your 3100 fuel rail. So my question is... is there anywhere I can find the flow rating difference between my 3100 and the 3400 out of a 2002??

Main reason I am asking is because I need 1 new injector, because the wonderful P0305 code is up, and the injector is stuck open. Anyways, the cheapest injector is $75 from autozone, and everyone tells me... don't buy from there.. well I found this handy website... www.injector.com ...

so I called them up today, and they had suggested an injector at 18 lbs/hr.. They had said "I'll rate you at 200 hp at the crank, just in case you plan on doing more bolt ons"..

Ok thats all fine and dandy, however what's going to happen to my stock computer if and when I do this.. I still need to pass emissions.. sooooo, really any advise on this would be greatly appreciated!!

also, it's only $240 for a set of 6 "performance" injectors from them.. so that's what sparked my interest in this!!

[Azrael]

I think the injectors that come stock with the 3400 are 22 or 23 lb/hr. Not sure what the 3100's came with but it should be a lower rate. If you use a larger injector then your computer normally uses you'll run rich and get another code. Since you have OBDII you can have your computer tuned to use almost any size injector you want.