What would you do 1st, 2d, 3d, 4th, &c.??

[GA_GT_GRAMPA]

I need to replace lots of parts on my 3100GAGT, with 160,000mi on it. I want to begin building one in a crate to swap when the time comes, about early November. I know that there are LOTS of ideas on this site, but was just personally wondering where the best place will be to start. Later 3100/3400/3500 stock parts that will swap, larger TB and injectors, aftermarket goodies, boring, stroking, camming, etc. The Dollar limit is $2,000~$2,500 starting with a BARE block. NO NitrOx as yet planned, but want a bottom-end that will withstand that if the time comes. Can't afford a blower. Does anyone have parts to sell for this operation? Thanks.

[Forced_Firebird]

We sell modified 3x00 GM parts if you'ld like. You can see some of our stuff here...

http://s158.photobucket.com/albums/t...ild/?start=all

forcedfirebird/projectfirebird - Photobucket - Video and Image Hosting

forcedfirebird/projectfirebird/grimms mods - Photobucket - Video and Image Hosting

forcedfirebird/Paul in VA mods - Photobucket - Video and Image Hosting

forcedfirebird/Loners Turbo install - Photobucket - Video and Image Hosting

forcedfirebird/3100 UIM - Photobucket - Video and Image Hosting

forcedfirebird/3400 porting - Photobucket - Video and Image Hosting

forcedfirebird/FWD headers - Photobucket - Video and Image Hosting

Image hosting, free photo sharing & video sharing at Photobucket

forcedfirebird/PCV Bracket - Photobucket - Video and Image Hosting

forcedfirebird/TB Adapters - Photobucket - Video and Image Hosting

forcedfirebird/Steves cam install - Photobucket - Video and Image Hosting

forcedfirebird/the shop - Photobucket - Video and Image Hosting

We have a full CNC machine and fabrication shop.

I would suggest at least using 3500 top end, a 3400 bottom end, and pistons from a 3.4L Camaro. This combination with a good cam, some porting, and headers should net you well over 225hp to the wheels. You will have to tune the ECM for something this extreme, but you will be pleased.

You can contact me VIA private message or at Forced_Firebird @ yahoo.com for more information and price quoting.

Welcome to the 60 Degree V6 community :D