2.3 QuaD 4 - GM Performance Tuning

acbigshow · #1 (**permalink**) 09-13-2006, 01:06 AM

does anyone have a write up on how to set the cams and crank timing on a 90 Grand Am 2.3 Quad 4

10pracing · #2 (**permalink**) 01-19-2007, 01:34 AM

Strut your sorry self over to your local parts store and pick up a Chiltons or Haynes manual. It's all in there.

Gawd, if you didn't know that, what are you doing putting engines together?

acbigshow · #3 (**permalink**) 01-20-2007, 12:14 AM

whatcha wanna be such a smartass for

darkfox · #4 (**permalink**) 01-20-2007, 07:17 PM

there are holes in the cam gears for timing. set the crank so pistion 1 is at TDC and align the cam gears by putting a #8 (i think) bolt in the holes in the cam gears--they should also go through a matching hole in the timing housing.

Josh · #5 (**permalink**) 01-21-2007, 10:48 PM

Quote:

Originally Posted by acbigshow

does anyone have a write up on how to set the cams and crank timing on a 90 Grand Am 2.3 Quad 4

come on over to www.quad4forums.com and we will help you out.

Quote:

Originally Posted by 10pracing

Strut your sorry self over to your local parts store and pick up a Chiltons or Haynes manual. It's all in there.

Gawd, if you didn't know that, what are you doing putting engines together?

now was there really a reason for going off on him? I think you should think before you type.

10pracing · #6 (**permalink**) 01-22-2007, 05:45 PM

The bolts needed are 8 mm. I got that from my Chilton's Manual.

Teeheehee