SEMA 2009: Hennessey HPE700 Camaro

[jamz]

Filed under: Aftermarket, SEMA Show, Coupe, Performance, Chevrolet

Hennessey HPE700 Camaro - Click above for high-res image gallery

We like subtle and we like power. But at SEMA the two are usually mutually exclusive. Usually. After laying eyes and hands all over the 2010 Chevrolet Camaro HPE700 LS9 and talking at length with John Hennessey, we think we've found our favorite Chevy of the show.

We've been covering its development from the beginning, so just a quick recap: After moving a few vacuum lines, fabricating a custom header and spending three months working out the wiring, Hennessey and his crew shoehorned the Corvette ZR1's supercharged LS9 into the engine bay, fitted a new intercooler and pulleys and tuned the Camaro to 725 hp (at 6,400 RPM) and 741 lb-ft of torque (at 3,200 RPM).

According to the man behind the machine, the HEP700 is putting out 651 hp and around 650 lb-ft of torque to the wheels on a Dynojet, good for a 0-60 MPH time of 3.5 seconds and a quarter mile sprint of 11.3 seconds at 126 MPH. And the mods didn't end with the engine. A set of KW V3s are fitted at all four corners and coupled with the 20-inch wheels with 275/35 (front) and 305/35 (rear) rubber, contributes to a claimed skid pad of 1.01g. Six-pot Brembos clamp onto 15.1-inch discs in front, while 14.1-inch rear rotors are squeezed by four-piston calipers, helping the HPE700 stop from 60 in 104 feet.

If you're aching to get your hands on one of the 24 ZR1-powered Camaros, you'd better drop a dime post haste -- there are only five remaining, each carrying a price tag of $119,500.


Gallery: SEMA 2009: Hennessey HPE700 Camaro



Photos copyright (C)2009 Drew Phillips / Weblogs, Inc.SEMA 2009: Hennessey HPE700 Camaro originally appeared on Autoblog on Wed, 04 Nov 2009 14:57:00 EST. Please see our terms for use of feeds.



Permalink | Email this | Comments

More...